Produktai skirti 6 linija helix (17)

Helix steel aisi Helical bar in AISI 304 stainless steel, cold drawn, with high mechanical performance, for the reinforced styling of joints and for connections, including through-holes, on masonry, reinforced concrete, arches and vaults. Suitable for the consolidation of structures in seismic areas; advantageous in combination with hydraulic binders (cement and hydraulic lime) and with resin matrix binders, it particularly facilitates the achievement of physical and mechanical performances in combination with Unisan mortar, with those of the REPAR, GROUT family and with the structural resins of the SYNTECH family. The optional accessory Connector Steel Aisi 304, supplied separately on request, allows the connection between the passing helical bar and the helical bar positioned deeply on the stripped joint. Helix Steel AISI 304 bars are available in a range of diameters: 6, 8, 10 or 12 mm, all characterised by their durability even in aggressive environments, their high tensile and shear strength, and excellent flexibility. Such characteristics make the use of these bars particularly advantageous in combination with hydraulic binders (cement, hydraulic lime), air binders (air lime) and resinous matrix binders. Flexibility, handling and versatility with various binder matrices, permit the realisation of rapid, non-invasive reinforcement operations, being easy to apply and with low installation costs. Very high mechanical physical benefits come when combined with our mortars of the REPAR, GROUT and Unisan lines and the structural resins of the SYNTECH line. Reinforcement operations on concrete and masonry structures. Reinforced pointing of joints. Structural one-sided connections or through-holes crossing the entire section. Helical morphology allows optimal gripping on bricks, mortars, stones and on old walls of historical and cultural interest generally. The durability against atmospheric and environmental conditioning makes the use of Helix Steel AISI 304 bars particularly advantageous in the structures affected by the presence of aggressive soluble salts (sulphates, nitrates, phosphates). Reinforced pointing of joints: Deep stripping of joints can ensure the placement of the bar at a depth of a few centimetres from the surface. To remove any loose and crumbly parts (stone, bricks, enticing mortar, etc.). Cleaning and saturation of the substrate with pressure washing. To remove any saline efflorescence by brushing or sandblasting. Connections on masonry, concrete, arches and vaults: Make sure that there are no loose or crumbly parts on the substrate. Stripping of mortar joints. Cleaning and saturation of the substrate with pressure washing. To remove any saline efflorescence by brushing or sandblasting. Reinforced pointing of joints: Reinforced pointing of masonry joints by filling part of the joint profile with an initial layer of Unisan fibre-reinforced composite mortar (see the data sheet), then on the mortar whilst still wet, inserting the Helix Steel AISI 304 bar before covering with a final layer of Unisan mortar. Press the mortar inside the joint, being sure to press well until totally full and flush with the wall. The temperature of the substrate must be between +5° and +35° C. Connections on masonry, concrete, arches and vaults: After carefully preparing the substrate and before applying the first layer of structural mortar (lime- or cement-based depending on the type of operation), wet with water at low pressure until complete saturation, bearing in mind that a lack of saturation may prevent adhesion and cause cracking in the mortar. If necessary, apply a rough coat of Untersana mortar. Proceed with creating holes of a suitable diameter and inclination (at 45° if the operation is undertaken only on one side of the structural element). Before they are bent in anticipation of the mesh, the connectors emerge from the substrate by at least 10–15 centimetres from flush with the wall. Apply an initial coat of Unisan fibre-reinforced composite mortar (see the technical data sheet) by hand (with stainless steel trowel or putty knife) or with a plastering machine to achieve a thickness of about 1.5 centimetres, leaving the surface sufficiently rough to facilitate the adhesion of the subsequent layer. Alternatively, depending on the structural requirements, mortars of the REPAR line can be used. Place the primed alkaline-resistant fibreglass mesh of the ARMAGLASS STUCTURA line (see the technical data sheet of the selected product), placing it on the still-fresh mortar by passing the Helix Steel AISI 304 connector between the bars of the mesh. After bending the connector, restraining the mesh, apply a second finishing layer of mortar (Unisan or REPAR) at a thickness of about 1.5 centimetres. Product to be purchased as needed. Packaging: Roll of 10 meters UM: €/kg

unsere Edelstahldrahtseile sind widerstandsfähige Stahlseile in verschiedenen Konstruktionen, Festigkeiten und Durchmessern für Marine, Hafen, Outdoor, als Drahtseil für Einstreuschieber und Schrapper, in Biogasanlagen u.v.m. Unser Leistungsangebot umfasst über 1.500 Seiltypen, die jederzeit im Lager abgerufen werden können. Hierunter befinden sich rostfreie Stahlseile in den Werkstoffen AISI 304, AISI 316, 1.4301, 1.4401 von 0,3 bis 20 mm in den Seilfestigkeitsklassen 1570, 1770 und 1960 N/mm² in den folgenden gängigen Konstruktionen jederzeit auf Lager: - 6x7+FC - 6x7+WSC (7x7) - 6x19+FC - 6x19+WSC (7x19) - 6x37+FC -6x37+WSC (7x37) - 6x36WS+FC - 6x36+IWRC () - 18x7+FC - 18x7+WSC (19x7) weitere Konstruktionen, Werkstoffe wie (1.4539, AISI 904L) und Festigkeiten auf Anfrage möglich.

Multi-coil filaments

Rosario in piombo, grammature comprese tra 7 g/m a 350 g/m

Spiral Concertina razor wire provides a simple and effective solution for perimeter security. Its sharp-edged blades and straightforward design make it a reliable deterrent against intruders in various settings. Whether protecting military installations, border security, correctional facilities, or commercial and residential properties, razor wire offers enhanced security, cost-effectiveness, and ease of installation.

SMD-Schablonen zur Leiterplattenbestückung für die industrielle Baugruppenfertigung SMD-Schablonen aus Edelstahl 1.4301 für alle gängigen Schnellspannsysteme (Lotpastenschablonen und Klebeschablonen) mit hohen Aperturpositionsgenauigkeiten. Zusatzoptionen: Elektropolitur (einseitig oder zweiseitig), Nanobeschichtung, Kantenschutz, Archivtasche mit Haken, Expressversand

zur Geräuschreduzierung. Eine erhöhte Randfeldstärke bei meist nassen Wetterbedingungen führt mitunter zu störenden hoch- bzw. tieffrequenten Lärmemissionen. Um diese zu reduzieren ist das „Anti-Corona Glasgeperlt-Seil" von LUMPI-BERNDORF die erste Wahl. HYDROPHILE OBERFLÄCHE Als Maßnahme um den Korona-Entladungen bei Hochspannungsfreileitungen effektiv entgegen zu wirken hat LUMPI-BERNDORF ein materialschonendes Verfahren zur Erreichung einer hydrophilen Oberfläche entwickelt. Erst durch die Erhöhung der Hydrophilie ist es möglich, die Geräuschentwicklung auf ein Minimum zu reduzieren.

Material: Wolfram oder nach Kundenspezifikation Drahtdurchmesser: 0,04 mm bis 0,70 mm Anwendungen: • Halogenlampen

CENTER UNITUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT Suited for outdoor use - for Metro, Access or FTTx implementations and and for blowing in into mini pipe systems FILLING:dry filling / swellable materials PRODUCT SUITABILITY:Fiber optic cable Standard marking:PENGG KABEL – cable type – fiber count/type – ID number – meter tube diameter mm:3,0 number of tubes:1 max. fibers / tube:24 max. number of fibers:24 tensile strength approx. N:400 weight approx. kg/km:13,0 outer diameter approx. mm:3,9 compressive strength (crush):1000 N/10 cm impact:1 Nm (3 impacts, 300 mm hammer radius) torsion:5 cycles ±360° kink, tube:The tube do not kink min. bending radius:R = 20 x D (cable outer diameter) storage and transport:-30°C up to +70°C installation:-5°C up to +50°C operation:-20°C up to +70°C water penetration:No water on free end

Flat cable is used in elevating system to transmit signals from car to control panel.

These cables are designed for the transmission of analogue or digital signals in indoor or outdoor connection tools and control systems. They are mainly used in communication, telecom and automation systems, petrochemical plants, oil & gas and construction industries. In the event of a fire, thanks to their HFFR compound, they do not catch fire easily and the fire goes off itself. These cables have low smoke density and they do not produce poisonous and corrosive gases during fire.

Esnek hortum olarak bilinen bu bağlantı parçaları hava, buhar ve gazlar gibi gazlı sıvılar ve su, yağlar ve kimyasallar gibi sıvılar dahil olmak üzere çok çeşitli sıvıları transfer etmek için kullanılır.

La gaine SER-4 est une formulation à base de polyoléfine hautes performances, d’usage général avec une bonne tenue aux fluides et solvants courants. Convenant pour une large gamme d’utilisations, cette gaine peut être utilisée pour l’isolation, le câblage, la protection mécanique ou l’identification dans la plupart des applications industrielles ou militaires. Grâce à son rétreint élevé de 4:1, elle peut permettre de couvrir une gamme étendue de diamètres avec un nombre limité de tailles. Rétreint:4:1 Température d’utilisation:-55°C à 135°C Température de rétreint:> 90°C Normes:ROHS, UL224, CSA Autoextinguible:Oui Type:SER-4

Wire ropes for cranes - 8 x 25F - PWRC "HICRO"

In coal mining, gas-and-oil producing industry, metallurgy, engineering, construction industry, sea and river transport. It can be used as lightning protection at high voltage lines.Steel cable (rope) is made of galvanized steel wire (number of wires 19) twisted as single or in layers and is covered with anticorrosive temperature resistant lubricant material. agreed with the customer. Deviation from length is possible: up to 400m +5%, above 400m +20%. STANDARD:GOST 3241-91, 3063-90 FOREIGN ANALOGUE:С GOST 3241-91 | 3063-90

Umschneidetechnik, max. 1.700 Hübe/min., 13.600 Teile/min.

Shielded and Foiled flat elevator cables are used for CANBUS system in elevator.